Dataprobe iBoot-G2S, Руководство пользователя

Страница: 31 / 41

V180817w iBoot-G2+ / iBoot-G2S Page 31
Device Commands (continued)
Set commands are available to the administrator only
set upgrade enable <yes | no> This command enables or disables the ability to upload
new firmware no
get upgrade Displays upload firmware enabled status.
set disable off <yes | no> This will enable the diable off feature. See section 7.14 no
get disable off Displays disable off status.
login Prompts for admin credentials when logged in as user
logout Terminates the session
reboot This command reboots the iBoot-G2+.
Graceful Shutdown Commands Set commands are available to the administrator only
get gsd This command returns all the current settings for
Graceful Shutdown
Main:
Enabled: No
IP Address: 0.0.0.0
Username:
Password:
Hard Shutdown Delay: 120
Hard Reboot Delay: 120
Exp1:
Enabled: No
IP Address: 0.0.0.0
Username:
Password:
Hard Shutdown Delay: 120
Hard Reboot Delay: 120
Exp2:
Enabled: No
IP Address: 0.0.0.0
Username:
Password:
Hard Shutdown Delay: 120
Hard Reboot Delay: 120
set gsd < main | exp1 | exp2 > enabled
<yes | no> This command enables or disables the shutdown delay
process. no
set gsd <main | exp1 | exp2> ipaddress
<dotted decimal> This command is used to set IP address of the target
system for graceful shutdown.
set gsd <main | exp1 | exp2> username
<20 char. max> This command sets username of the target system
set gsd <main | exp1 | exp2> password
<20 char. max> This command sets the password of the target system
set gsd <main | exp1 | exp2>
shutdowndelay <0-999> This command sets the shutdown delay in seconds
set gsd <main | exp1 | exp2> rebootdelay
<0-999> This command sets the reboot delay in seconds