V180817w
iBoot-G2+ / iBoot-G2S
Page 18
7.3.
Network Settings
IP Mode: Select Static to set the IP address
using the fields below, or DHCP to allow a DHCP
server to set the IP Address.
IP address: Enter a static IP address. This will be
automatically set if using DHCP.
Subnet Mask: Enter the Subnet Mask. This will be
automatically set if using DHCP.
Gateway: Enter the Gateway. This will be
automatically set if using DHCP.
DNS: Enter the Domain Name Server. This will
be automatically set if using DHCP.
7.4.
Advanced Network Settings
HTTP Port: This setting is used to allow access to iBoot-G2+ on a port other than the Web standard Port 80.
If the port is changed, you will need to identify the protocol and port number when you enter iBoot's IP address
into your browser. If the new port is 8080 then use the URL would be
http://192.168.1.254:8080
.
Linkback URL: This setting allows control of the
hotlink displayed on the Goodbye page. It allows
use of the public IP address or DNS name instead
of the internal IP Address of the iBoot-G2+, which
is the default setting. If this setting is left blank, the
hotlink will be the IP Address of the unit.
Note:
You should
not
include the http:// part of the
URL. If you set any HTTP Port other than Web
standard 80, you must append to the URL.
examples:[ myiboot.com ][ myiboot.com:8080 ]
Telnet Port: This setting is used to allow access to
the iBoot-G2+ via telnet by ports other than
standard 23.
DxP Port: This setting is used to allow access to the iBoot-G2+ via Dataprobe Exchange Protocol (DxP) using
ports other than standard 9100. see DxP Protocol
section 10
.
Enable DxP Control: This setting enables external devices to control the iBoot-G2+ via DxP protocol.
Enable DxP Query: This setting enables external devices to query the status of the iBoot-G2+ via DxP
protocol.
Enable Cloud Services: This setting enables the iBoot-G2+ for iBoot Cloud Services (iBCS). iBCS allows the
iBoot to be monitored and controlled through a web portal from any browser. It allows multiple iBoots to be
managed from a single portal without the need for port redirection or a staic public ip address. For a complete
description of iBCS and setup instructions, see iBoot Cloud Service
section 8
.
Note:
All of the TCP/IP Settings require a reboot of the iBoot-G2+. After clicking Save, a Reboot button will
appear next to the Reset and Save buttons near the top of the page. The new settings will not take effect until
the unit is rebooted. Reboot will not affect the power position of the iBoot-G2+. Upon Clicking Reboot, the
goodbye page is displayed with a link to re-login.
