Web Enabled Power Switch
Models: iBoot-G2S
iBoot-G2+
August 2018
1. Table of Contents
1.
Table of Contents .................................... 1
2.
Important Safety Instructions .................. 2
3.
General Description ................................ 3
4.
Hardware Installation .............................. 5
5.
Initial Configuration ................................. 9
6.
Web Browser Operation ........................ 11
7.
Web Setup ............................................ 15
8.
iBoot Cloud Service .............................. 27
9.
Command Line Interface ....................... 29
10.
DxP Protocol ......................................... 38
11.
Firmware Upgrades ............................... 38
12.
Troubleshooting .................................... 39
13.
Specifications ........................................ 40
14.
Technical Support and Warranty .......... 41
Congratulations on purchasing the best network controlled power
switch available. This manual covers two models, iBoot-G2+ and
iBoot-G2S. This manual refers to the iBoot-G2+ and notes the
changes for the iBoot-G2S.
Web Setup and Control:
Simple browser interface for one click
reboot and all configuration.
iBoot Cloud Service:
Control all your iBoots from a single sign-on.
Eliminates port-forwarding and security issues.
Telnet:
setup and control of all fuctions. Allows easy scripting.
Network Switch:
Built-in 2 Port 10/100 Network Switch (iBoot-G2S
only). Eliminates need for extra router port and simplifies installation.
Expansion:
Add low cost iBoot-EXP units for up to three outlets
controlled.
I/O Control:
Control or Monitor your own digital Inputs and Outputs.
Use inputs to control the local AC outlet.
AutoPing:
Automatic monitoring and action for failed equipment.
Graceful Shutdown:
attempt a soft shutdown or reboot before
controlling power.
Disable Off:
To prevent accidental off state of an outlet.
Event Scheduling:
Power actions on regular intervals. (14 events)
Management Utility:
Easy Setup, Firmware upgrades and Reset to
Factory Default
Easy Software Integration:
Use the DxP Protocol to build your own
custom applications.
Control Software:
Create batch files or Shortcuts to control power.
URL control:
Create your own website link to control power.
iBoot-G2+
iBoot-G2S
