Datamax E-Class Mark III Professional+, Руководство оператора

Страница: 80 / 92

74 Appendix B – WLAN & LAN Setup
The printer will now search for a server. Allow up to 90 seconds
for the printer to retrieve an IP address.
At this point it is recommended to print a Network Report. This
Network Report is generated by the printer and lists important
default information such as the IP and MAC Addresses as well as
SSID for wireless equipped cards. To print the ‘Network Report’:
Press the
button
to highlight the ‘TEST’ menu branch and
then press the button.
Using the button, scroll to Network Report, and then press
the
button.
When prompted choose either “View” (to view the information
on the display) or “Print” (to print the information).
Once the previous steps have been successfully completed you
may now use the IP Address to install a printer driver, and start
printing from your Windows
®
applications. See section B.3,
Installing the Printer Driver.
The information on this label will vary depending
on your configuration and firmware version.
B.2.1 Wireless Setup – Ad-Hoc
After a successful setup is made via a wired connection, the Wireless connection (if equipped) can now be
configured in ad-hoc mode using a static IP address. To configure the wireless card in Ad-hoc mode, you must
configure your host computer to match the IP settings of the printer. Refer to your operating system’s or your
wireless network card documentation for information on how to configure your computer.
1. Open your web browser. Type in the IP
Address of the printer. The Default IP is:
192.168.10.26.

If a different IP Address has been
assigned to the printer, make sure to
enter the correct IP address.
A page similar to the right will appear:
2. Click on the “Wireless Ethernet Settings” menu item on the left side of the screen. Locate and set the
following items:

In the “Acquire Address Method” section, select the “Use Static Addresses” radio button.

In the “Static IP Addresses” section, enter valid static IP addresses for Printer IP Address,
Printer Subnet Mask, and Printer Gateway.
3. Scroll down the page to “Network Type”, select “Ad-hoc” from the drop down box.
4. In the SSID field type the name of the SSID you wish to assign to the printer.