Datalogic Rhino 10 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 40

background image

User Manual

Rhino™ 10

20

n.

Developing server applications for use with Remote Desktop Protocol

The Rhino™ 10 supports Microsoft Remote Desktop Protocol (RDP). RDP allows the Rhino™ 10 to connect to a
server and automatically execute server based applications using the Rhino™ 10 as a remote interface device. All of
the features in the Rhino™ 10 are available to the server applicatio

Developing terminal applications for use with terminal emulators

The Rhino™ 10 includes Wavelink 4-in-1 Terminal Emulation client already pre-loaded and pre-licensed. See the
Wavelink user documentation on this product at

www.wavelink.com

.

Installing Applications on the Rhino™ 10

There are several ways you can install applications on the Rhino™ 10:



You can package your application as a cabinet (.cab) file and install it on the Rhino™ 10.



If you have a simple application, you may only need to install the .exe file.



You can copy a directory structure that contains the application, supporting files, DLLs, images, and data

files.

Datalogic recommends using .cab files to install your applications. The Rhino™ 10 uses standard Windows CE .cab
files and will install third-party .cab files. You can have your .cab files place your application in any of these memory lo-
cations on the Rhino™ 10:



Flash File Store. The Flash File Store is an area of storage which is embedded in a section of the system

flash memory. This storage is not erased during a reboot. Although it might be erased during the reflashing
process (or a clean boot).



The optional SD card. If you are using an SD card, this should be the primary location to place application

installation files as it is not erased during a reflashing process.

There are several ways you can install files and applications on the Rhino™ 10:



USB Flash

Drive



SD card



Network transfer



Wavelink Avalanche (refer to the Avalanche user manual at

www.wavelink.com

)

The following sections explain how to use each one of these processes to install your application on the Rhino™ 10.

Installing Applications Using Your USB Flash Drive

To install applications using a USB Memory device

1. Copy your application file to the USB Flash Drive.

2. Insert the USB Flash Drive into one of the USB ports on the Rhino™ 10.

3. Copy the application onto the FlashDisk or the StorageCard.

Installing Applications Using Your SD Card

To install applications using an SD card:

1. Copy your application file to an SD card.

2. If you are using an FTP server, or Wavelink Avalanche to copy the files to the SD card, place the application

in the SD Card folder located in

My Windows Mobile-Based Device

.

«
...
22
23
24
25
26
...
»

Содержание Rhino 10









































Отзывы:

Нет отзывов

Похожие инструкции для Rhino 10

nanoe CZ-CNEXU1

Бренд: Panasonic Страницы: 108

Бренд: ZAPTEC Страницы: 64

Бренд: ZAPTEC Страницы: 24

Бренд: Datalogic Страницы: 248

Бренд: cam Страницы: 28

Бренд: EarthX Страницы: 17

Бренд: EarthX Страницы: 23

Line FP7000 Housing

Бренд: Fantasea Страницы: 5

Бренд: Fantasea Страницы: 5

Бренд: Fancom Страницы: 49

Бренд: FANATEC Страницы: 2

Бренд: Vello Страницы: 12

Бренд: Targus Страницы: 4

Бренд: Targus Страницы: 2

Бренд: Tarot Страницы: 5

Бренд: Xerox Страницы: 16

Бренд: Eaton Страницы: 11

Бренд: Miditech Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды