Datalogic Quickscan QD2200, Руководство по продукции

Страница: 21 / 235

USING THE QUICKSCAN™ I QD2200
PRODUCT REFERENCE GUIDE
8
USING THE QUICKSCAN™ I QD2200
The Quickscan™ I QD2200 normally functions by capturing and decoding codes.
Bar Code Reading
Point the reader at the target and pull the trigger to enable the illuminator (red beam)
to decode the bar code label. The illuminator will remain on until the symbol is
decoded. When scanning a bar code label, you can adjust the distance or angle to the
label to help facilitate reading. Successful reading is signaled by an audible tone plus a
good-read green spot LED indicator.
Relative Size and Location of Green Spot
INTERFACE SELECTION
Upon completing the physical connection between the scanner and its host, proceed
directly to "
Configuring the Interface" on page 9
for information and programming for the
interface type the scanner is connected to (for example: USB etc.) and scan the appro -
priate bar code in that section to select your system’s correct interface type.
The scanner will support all the following sets of host interfaces:
• USB HID POS
• USB Toshiba TEC
• USB (Keyboard, COM, OEM)
• USB Composite (Ke COM)
• USB for Magellan Scanners