Datalogic Quickscan QD2200, Руководство по продукции

Страница: 91 / 235

LED CONTROL ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
61
Good Read LED Duration
This feature specifies the amount of time that the Good Read LED remains on following
a good read. The good read LED on time can be set within a range of 100 milliseconds to
25,500 milliseconds (0.1 to 25.5 seconds) in 100ms increments.
See
page 169
in “References” for detailed instructions and examples for setting this fea -
ture.
Select Good Read LED Duration Setting
$CLAGL
To configure this feature, scan the ENTER/EXIT PRO -
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu -
meric characters in Appendix D, Keypad represent -
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
CANCEL

003 = Good Read LED stays on for 300 ms.
NOTE: Indicators are dimmed during sleep.