Datalogic DX8210, Справочное руководство

Страница: 141 / 300

Messaging | Message Format
Reference Manual 129
<STX><scanner_nr><space><barcode><ETX><CR><LF>
where:
<scanner_nr> = 2-digit number in the range 00-31
AM Message Target
Select Main Serial Port, Aux Serial Port, or a User Socket from the drop-down list.
Multi-Tx Transport Disable
This parameter manages the message transmission through the different
communication channels.
If unchecked (check box not selected), messages are transmitted through all the
communication channels having the Data Tx parameter enabled.
If checked (check box selected), messages are sent through all the communication
channels having the Data Tx parameter enabled until the scanner receives one of
the three possible communication messages (Status Request, Encoder Counter
Request, Initialization Command). As soon as this condition occurs, all messages
will be transmitted only through the specific channel sending one of the three
possible communication messages while other channels are ignored. In this way,
the last channel sending one of the possible communication messages will become
the one used for transmission.
Spontaneous Status Message
Select check box to enable. In case of diagnostic errors, this message is sent every
40 seconds.
Purolator Custom Check
Select the check box to enable. If enabled, all service labels sharing the following
characteristics will not be filtered by the Code Filter Depth and Encoder Timeout
parameters:
all service labels containing 2 characters only (e.g. "F1", "F2", ecc);
all service labels of 8 characters starting with "ENP";
all service labels of 9 characters starting with "OSNR".
Code Filter
Enable UPS Code Filter
Select the check box to enable. If selected, the UPS Code Filters, PTN Code Filters,
and Postal Code Filters panels open.
UPS Code Filters
Tracking Label - Starts with '1Z'
Select check box to enable. If selected, function allows the transmission of codes
belonging to the Code 128 and Code 39 families starting with '1Z', '3Z', '1B' or '3B'.
The length of these codes is 18 digits.
Service Upgrade Label - Starts with'403', Length is 8
Select check box to enable. If selected, function allows the transmission of codes
belonging to the Code 128 and Code 39 families starting with '403'. The length of
these codes is 8 digits.
PTN Code Filters
Select all codes of PTN type, except codes below (that must be selected)
Select check box to enable. If selected, it is possible to transmit all Code 128 and
Code 39 codes belonging to this type having a length of 11 digits with the
exception of those starting with:
- '400', '420', '421', '51L', '52L', '54L', '55L'
Starts with...
Select each check box to enable/include that prefix.
Postal Code Filters
Starts with...
Select each check box to enable/include that prefix. This allows the transmission of
codes belonging to the Code 128 and Code 39 families having any of the following
selected characteristics:
starting with '420' and with length 8 or 12 digits
starting with '421' and with length from 6 to 15 digits