Datalogic DS6500 Series, Справочное руководство

Страница: 55 / 89

INSTALLATION
41
2
The following image shows a system consisting of four readers supplied by two different
power units. The Master reader receives external signals (trigger, serial to host, etc.) and
together with Slave 1 is powered by the first PG6000 through a C-BOX 100, while Slave 2
and Slave 3 are connected to another PG6000 through a C-BOX 100 and the 610X cable.
Each PG6000 supplies up to 2 readers. CAB611X cable connects two different groups:
Master, Slave 1 AND Slave 2, Slave 3. It does not propagate power but only network and
synchronization signals.
*
PG6000 can be connected directly to Slave 2 by means of a custom cable with 2 AWG 20 wires (VS + GND).
Figure 66 - Single P.S. with more than 2 Readers and Multiple Power Units
The following image shows a system consisting of five readers, where the Master reader,
receives external signals (trigger, serial to host, etc.) and together with Slave 1 and Slave 2
is powered by the C-BOX 100, while Slave 3, and Slave 4 are connected to the power supply
through the PWR-120 and the 610X cable. This is due to the fact that C-BOX 100 can supply
a maximum of 3 readers. This means that the CAB611X cable connects two different groups:
Master, Slave 1, Slave 2 AND Slave 3, Slave 4. It does not propagate power but only
network and synchronization signals.
The cable connecting PWR-120 to Slave 3 is a custom cable with two AWG 20 wires
(VS + GND).
Figure 67 - Single P.S. with more than 2 Readers and Single Power Unit
C-BOX 100
Local Host
Master
Slave 1
Slave 2
Slave 3
PWR120
P.S.
CAB611X
CAB600X
CAB610X
BTK6000
BTK6000
CAB610X
CAB610X
Slave 4
D-SUB 25-pin
Master
CAB600X
BTK6000
CAB610X
C-BOX 100
PG6000
CAB611X
CAB610X
BTK6000
PG6000*
C-BOX 100
CAB600X
Local Host
Slave 1
Slave 3
Slave 2
P.S.