Datalogic C-BOX 100, Руководство по установке

Страница: 22 / 25

C-BOX 100
12
2
2.4.6 OM4000 Jumper Settings
J1 J2
Figure 12 - OM4000 Jumpers
These jumpers allow connection to the EXT TRIG signals on separate spring clamp
terminals for applications which use the OM4000 Oscillating Mirror in Trigger Mode.
They are used together and have the following significance:
when a jumper is in the J1 position (see Figure above) pin 40 is connected to pin 27
(EXT TRIG+); a jumper in J2 position connects pin 20 to pin 28 (EXT TRIG-).
If the jumpers are removed pin 20 and pin 40 are disconnected.