Datalogic C-BOX 100, Руководство по установке

Страница: 19 / 25

INSTALLATION
9
2
Pin Name
1, 3, 5 VS
2, 4, 6 GND
7, 8 EARTH GROUND
*9, 13 RS485 CABLE SHIELD
20, 40 RESERVED
35 TX AUX
37 RX AUX
DS2100
DS2400 DS4300
DS4600/A
DS1100
DS2200 DS6XXX MATRIX-2XXX
(MATRIX-1XXX)
21 OUT1+ OUT1+ OUT1+ OUT1+ OUT1+ (NC)
22 OUT REF OUT1- IO REF OUT1- OUT1- (NC)
23 OUT2+ OUT2+ OUT2+ OUT2+ OUT2+ (NC)
24 OUT REF OUT2- IO REF OUT2- OUT2- (NC)
25 NC RESERVED NC OUT 3A OUT3+
26 NC RESERVED IN1- OUT 3B OUT3-
27 EXT TRIG+ EXT TRIG+ EXT TRIG+ EXT TRIG A EXT TRIG A
28 EXT TRIG- EXT TRIG- EXT TRIG- EXT TRIG B EXT TRIG B
29 NC IN1+ NC IN 2A IN 2A (NC)
30 NC IN1- IO REF IN 2B IN 2B(NC)
31 NC IN2+ NC IN 3A NC
32 NC IN2- NC IN 4A NC
33 RESERVED RESERVED RESERVED IN 3A NC
34 RESERVED RESERVED RESERVED IN 4A NC
36 RTSA GND NC IN 3B/IN 4B NC
38 CTSA SGND AUX NC GND GND
*39 SGND SGND SGND GND GND
DS2100 DS2400 DS4300
DS4600/A DS6XXX MATRIX-2XXX
DS1100 DS2200
(MATRIX-1XXX)
RS232 RS485FD RS485HD 20mA CL (**) RTX485HD
*11, 15 TX232 TX485+ CLOUT+ ***
*12, 16 RTS232 TX485- RTX485- CLOUT- RTX485-
17 RX232 RX485+ CLIN+ *** RESERVED (NC)
18 CTS232 RX485- CLIN- RESERVED (NC)
*10, 14, 19 SGND MAIN SGND MAIN SGND MAIN SGND MAIN SGND MAIN
* The signals on pins 9, 10, 11 and 12 are repeated on pins 13, 14, 15 and 16 to facilitate
network connections (i.e. Multiplexer connections using the RS485 half-duplex Interface). In
this way the network bus can enter and exit the C-Box 100 from different spring clamps but
be physically connected together;
**
20 mA C.L. interface is not available for MATRIX-2XXX;
*** For DS4XXX scanners, the CLOUT+ and CLIN+ signals are available only when using a
passive 20 mA C.L. interface (see relevant manuals for details);
NOTE
Pin 7 or 8 should be connected to the earth ground.