Datalogic AV7000, Руководство по продукции

Страница: 216 / 352

E-GENIUS
202
AV7000 LINEAR CAMERA
Modify Settings | Device Settings | <Camera Name> | Logging
Use the Logging configuration window to configure how and what information is logged
(saved).
To view the Logging configuration window:
1. In the menu tree under Modify Settings, navigate to
Device Settings | Camera # (if
applicable) | Logging . The Logging window opens.
2. View the following camera information:
Advanced Logging
Click the link to go to the Advanced Logging window. The main Logging options will typically be
all that is needed for standard systems. Advanced logging options are available for problem
solving on cameras not connected with the standard decoder. Enabling them may fill the event
buffer with unimportant information and therefore overwrite important information.
Verbose Mode Enable
Select the check box to verbose logging. When disabled, the debug log will provide data for
Critical, Errors, Warnings, and Info in the log text. When enabled, diagnostic data is logged for
24 hours.
Verbose Timeout
Enter the number of minutes before Verbose Mode will be automatically disabled.
Every Process
Select the check box to log information from each process' system and application threads.
These threads perform similar actions for each process.
Image Saving
Select the check box to log information about image saving. This includes events to capture an
image, save image to local storage, rename the image, and transfer the image to its final
destination.
Protocol Index
Select the check box to Log information about protocol index.
Consult Datalogic Engineering before using this Advanced logging option.