Datalogic AV7000, Руководство по продукции

Страница: 123 / 352

MODIFY SETTINGS | GLOBAL SETTINGS | OPERATING MODE
PRODUCT REFERENCE GUIDE
109
Side by Side Verification
Select Enabled or Disabled from the drop-down.
In a “singulated” material handling system, parcels are separated by at least the minimum
spacing distance along the direction of travel; there is at most one parcel across the conveyor
at a time; therefore there is only one parcel present during a trigger cycle. A trigger is typically
generated by a photoeye or a hardware signal from the sorter.
In a singulated system, a Side-
by-Side (SBS) is an error condition in which these conditions are violated. The end-user wants
to know when this happens (when their parcel flow has inadvertently become “non-
singulated”), and Datalogic systems can tell them this by means of an SBS indicator in the Serial
or Ethernet “host message.”
D
IMENSIONER
(C
ORNER
D
ETECTION
)
AS
P
OSITION
S
ENSOR
S
ETTINGS
Place Dimensioning Results Based on Tach
Click the checkbox to enable the DM3610 to send dimensioning results based on a defined tach
value.
Side by Side Verification
In a “singulated” material handling system, parcels are separated by at least the minimum
spacing distance along the direction of travel; there is at most one parcel across the conveyor
at a time; therefore there is only one parcel present during a trigger cycle. A trigger is typically
generated by a photoeye or a hardware signal from the sorter.
In a singulated system, a Side-
by-Side (SBS) is an error condition in which these conditions are violated. The end-user wants
to know when this happens (when their parcel flow has inadvertently become “non-
singulated”), and Datalogic systems can tell them this by means of an SBS indicator in the Serial
or Ethernet “host message.”
Minimum Object Height for Corner Detection
Enter a value in mm or inches. This value along with Transmit Point Distance and Reference
Edge is used to help determine the corner of packages for possible printer applicator label
placement or other system needs.
S80
AS
P
OSITION
S
ENSOR
S
ETTINGS
S80 Configuration
Number of S80’s
Select None or 1 from the drop-down to specify the number of S80’s in your AV7000 system.
S80 #1 Settings
Connected to
Select Not Assigned or a camera in the system to which the S80 is connected.
S80 Mounting Position
Select Top, Left or Right to specify the S80 position.
Far Distance
Enter the S80 Far Distance in mm.