Datalogic AV7000, Руководство по продукции

Страница: 163 / 352

PRODUCT REFERENCE GUIDE
149
Device Select
If not using Global Configuration, select a listed named device from the drop-down list.
Data Output Protocol
Select from the drop-down list. Once selected, the input options for that selection are
revealed. Current options for Data Output Protocol are:
•Disable
•Standard
•Advanced
•Crisplant
•Beumer
•Custom 1-5
These five custom options are used by Datalogic programming when other options do not
meet customer requirements. They will be name to identify customer needs.
S
TANDARD
See “Protocol Index Settings” on page 152.
A
DVANCED
Advanced Formatter Index
Select an index number from the drop-down list. This selection is available when Data Output
Protocol > Advanced
is selected.
See “Protocol Index Settings” on page 152.
C
RISPANT
Delay Request Message
When unchecked, the request message gets sent at start of trigger. Select this check box and
the request message will be delayed by the Reference Edge and Distance to Trigger Line
specified here. This is available only if
Use Global Configuration
is selected.
Distance to Trigger Line
Enter the distance from the receiving point of the Protocol Index to the trigger line in the field
provided.


This parameter specifies the distance from the physical Trigger Line (i.e. Trigger Source) to the
expected receiving point of the Protocol Index, measured in mm. It is used together with the
Minimum Distance Between Two Consecutive Objects (below) parameter to assign the
Protocol Index information to the correct package.
Distance to Trigger Line State