DKG-209 User Manual V-29
(20.08.2013)
DKG-209 AUTOMATIC
MAINS FAILURE UNIT
The controller is a comprehensive low cost AMF
unit for single genset standby or dual genset
mutual standby operations.
The unit is able to initiate modem calls and send
SMS messages in fault conditions through
external modem.
The unit provides a comprehensive set of
digitally adjustable timers, threshold levels, input
and output configurations and operating
sequences. All programs may be modified via
front panel pushbuttons, and do not require an
external unit.
Last 100 faults are stored in the event log file.
The event log includes not only the engine-hours
information, but also a comprehensive list of
measured genset parameters at the time that the
fault has occurred.
The WINDOWS based RAINBOW program
allows remote monitoring and control.
The unit supports MODBUS protocol enabling
communication with PLCs and building
management systems. The MODBUS protocol
is also supported through GSM and PSTN
modems.
The unit offers multiple language support.
Low cost
True RMS measurements
Dual genset mutual standby operation
Event logging with engine run hours
stamp and measurements
Field adjustable parameters
Logic level serial port
Free MS-Windows Remote monitoring
SW
GSM and PSTN modem support
GSM SMS message sending on fault
MODBUS communications
Multiple language support
Customer logo display capability
1A protected semiconductor outputs
Configurable analogue inputs: 3
Configurable digital inputs: 5
Configurable relay outputs: 1
Total relay outputs: 5
Plug-in connection system
FEATURES
DESCRIPTION