Datafox Evo 4.6 FleKey, Руководство пользователя

Страница: 38 / 184

Manual Datafox Evo 4.6 FleKey Page 31 Date: 14.09.2021 V 04.03.17.XX
Change Config.
In the menu item "Config. Switch" you can switch between configurations. Furthermore, the auto-
matic selection of the configuration can be set here. If a network is selected here that can also es-
tablish a connection to an access point, it is not guaranteed that this network will be selected again
when leaving the BIOS menu. If automatic selection of the configuration is activated, the network
with the best reception quality is selected. However, if you want to connect to a specific network,
this must be set as the default and the automatic configuration selection needs to be switched off.
New Connection
When this menu item is selected, a network scan is carried out. Afterwards, one of the net-
works can be selected from the list. A key is then entered (Figure 4). An attempt is then made
to establish a connection with the network. The result of the connection is displayed on the
screen ( figure 5). If a connection could be established, a storage location is selected in the
next dialogue. The configuration is then saved. If desired, the new configuration can be used
directly as the standard ( figure 6). In addition, it is possible to enter the SSID manually. In
this way, networks that are not within range or do not transmit the SSID can be added.
!
Attention:
Currently, however, only the connection to WPA2 networks is supported when entering
with SSID.