Datafox Evo 4.6 FleKey, Руководство пользователя

Страница: 104 / 184

Manual Datafox Evo 4.6 FleKey Page 97 Date: 14.09.2021 V 04.03.17.XX
5.8.5. Access control II with PHG-Modules
The following hardware is available to set up an access control with PHG modules. The devices can
be combined in different ways according to their hardware requirements.
EVO 4.6 FlexKey
VOXIO
VOXIO T-Z
Relino &
Relino B
Siedle
IO-Box
From firmware
version of the access reader 69806D of the PHG readers the autologin function for Mifare is sup-
ported. Here for 5 of the max. 6 keys can be used in the setup.
If the device MasterIV is used for access control, door
supervision or remote monitoring, one device can su-
pervise up to 8 doors and control 12 doors at most.
Flush-mounted: 81 x 81 x 11 mm (WxHxD)
Surface-mounted: 81 x 81 x 40 mm (WxHxD)
The VOXIO can be used with Legic or Mifare. It is available for in-wall or on-
wall mounting with or without keyboard. Each reader has a sabotage recog-
nition, three lamps for visualizing the state and a buzzer for the acoustic sig-
naling.
50 x 50 x 43 mm (WxHxD)
The RELINO (B) reader can be used with Legic or Mifare. It is available for
in-wall mounting. Each reader has three lamps for visualizing the state and a
buzzer for acoustic signaling.
51 x 48 x 22 mm (WxHxD)
The I/O box as equipment for the RFID wall reader or RELINO reader has
two digital inputs and two digital outputs. The I
2
C bus is used as interface.
100 x 100 x 20 mm (WxHxD)
The Siedle reader can be used with 125 kHz, Legic bzw. Mifare. It can be
mounted in the Siedle Vario 611 housingsand is available with and without
keyboard. Each reader has three lamps for visualizing the state and a
buzzer for the acoustic signalling.