Datafox Evo 4.6 FleKey, Руководство пользователя

Страница: 17 / 184

Manual Datafox Evo 4.6 FleKey Page 10 Date: 14.09.2021 V 04.03.17.XX
4. System Requirements / Hardware
4.1. System Structure
The system consists of the Datafox device, the DatafoxStudioIV, the communication DLL and a soft-
ware for processing the generated data.
4.2. Requirements for Operating Datafox Devices
In order to operate the Datafox device, you need a 230 V power connection for the Datafox power
supply. Depending on the main communication set, you need a corresponding transfer medium or
connection cable.
Main communication:

USB

one standard USB-A to USB-micro Cable (see the chapter connection USB).

RS485

a transmission path in accordance with the EIA-485 standard (see Connection
RS485).

GSM/GPRS

a distortion-free mobile connection (see Connection GSM).

WLAN WiFi

a distortion-free channel to an access point (802.11 b/g) within reach (see
Connection WLAN).
 at least one standard Ethernet cable, no „cross over“ (see Connection TCP)

HTTP (internet) via LAN

TCP/IP connection with free internet access. The data are
sent to a server.

Note:
With increasing demands on transfer rate and interference immunity, the demands
on the transmission path increase as well with regard to quality (interference immun-
ity).
Setup
Create setup Save setup Transfer setup to device
Software for processing the generated data
DatafoxStudioIV
Communication- DLL