DataExpert MBX8440, Руководство пользователя

Страница: 36 / 44

Page : 33
Chapter 3
AWARD BIOS Setup
3
IDE Primary Master PIO /IDE Primary Slave PIO
The default value is Auto.
Auto
: BIOS will automatically detect the Onboard PCI IDE HDD
Accessing mode.
Mode0-4 : Manually set the IDE Accessing mode.
IDE Secondary Master PIO /IDE Secondary Slave PIO
The default value is Auto.
Auto
: BIOS will automatically detect the Onboard PCI IDE HDD
Accessing mode.
Mode0-4 : Manually set the IDE Accessing mode.
IDE Primary Master UDMA/IDE Primary Slave UDMA
Allows you to select the first PCI IDE channel of the first master hard
disk mode or to detect it by the BIOS if the hard disk supports UDMA
(Ultra DMA, faster than DMA).
IDE Secondary Master UDMA/IDE Secondary Slave UDMA
Allows you to select the second PCI IDE channel of the secondary
master hard disk mode or to detect it by the BIOS if the hard disk
supports UDMA (Ultra DMA, faster than DMA).
On-Chip Primary/Secondary PCI IDE
Turn on(enable)/Turn off(disable) the onboard IDE function.
USB Keyboard Support
Enable : USB keyboard. Disable : AT keyboard.
Onboard FDC Controller
Choose disabled when you use an ISA card with FDD function, or
choose enabled to use the onboard FDD connector.
Onaboard Parallel Port
Select from a given set of parameters if the parallel port uses the
onboard I/O controller.
The options are : 278/IRQ5 , 3BC/IRQ7, 378/IRQ7(Default).
Parallel Port Mode
Allows you to connect with an advanced printer. Select SPP for standard
parallel port (SPP) used on IBM PC/XT, PC/AT and bi-directional
parallel port found on PS/2 system.
Select ECP Mode for Microsoft and HP Extended Capabilities Parallel
Port. Select ECP+EPP Mode for both ECP and EPP Modes ports.
The options are SPP (Default), EPP+SPP Mode, ECP Mode, ECP+EPP
Mode.