DataExpert MBX8440, Руководство пользователя

Страница: 41 / 44

Appendix
Page : 38
Hardware Monitor Setup/AGP Utility
A
A-1 System Health Monitor Utility
The system board comes with a System Health Monitor utility contained
in the provided CD/diskette. This utility shows the current temperature
of the processor, power voltages, and processor/chassis fan speed.
The utility also allows you to manually set the range of the processors
temperature, power voltages, and processor/chassis fan speed. If the
settings/values are over or under the set range, an error message will
pop-up and an alarm will sound. There are three types of sound for the
three different failure alarms (temperature, voltage and fan). Refer to
the Chipset Features Setup (Chapter 3) section for details.
When you hear a failure alarm, you must power off your computer and
check the following: processor fan/heatsink, chassis fan and power
supply. We recommend that you use the “Default Setting” which is the
ideal setting that would keep the system in good working condition.
Sets the time
interval for
monitoring the
system
Sets the range of
the processor’s
temperature
Current
temperature of
the processor
Current value of
each voltage
Sets the range of
each voltage
Sets the range of
the CPU/chassis
fan’s speed
Current speed of the CPU/
chassis fan’s speed
Selects the temperature scale
When enabled,this
screen will
minimize and
display a
histogram icon
after boot-up
These items,
when enabled,
will alert you in
case of failure