Datacom Systems DS-1404 Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 55

Datacom Systems DS-1404 Скачать руководство пользователя страница 39

Datacom Systems Inc. 2016

39

DURAstream

™

DS-1404, DS-1406, DS-2408 FASTstart Guide

6.2.4

Email Set Destination

Usage

Guidelines

Use this command to set the Destination for the email notifications. This email
address will receive notifications for all triggers that are turned on.

Syntax

EMAIL SET DESTINATION ([email protected])

Example

EMAIL SET DESTINATION [email protected]

Command

Notes



The email address is case-sensitive.



This should match an existing email address on the configured server.

6.2.5

Email Set Source

Usage

Guidelines

Use this command to set the Source for the email notifications. The emails that
are sent to the destination address will show that they are from this sender.

Syntax

EMAIL SET SOURCE ([email protected])

Example

EMAIL SET SOURCE [email protected]

Command

Notes



The email address is case-sensitive.



This should match an existing email address on the configured server.

6.2.6

Email Set Server

Usage

Guidelines

Use this command to set the server address that the DURAstream will use to
send out email notifications.

Syntax

EMAIL SET SERVER (mail.server.com)

Example

EMAIL SET SERVER west.exch12345.serverdata.net

«
...
37
38
39
40
41
...
»

Содержание DS-1404
























































Отзывы:

Нет отзывов