Datacom Systems DS-1404 Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 55

Datacom Systems DS-1404 Скачать руководство пользователя страница 36

Datacom Systems Inc. 2016

36

DURAstream

™

DS-1404, DS-1406, DS-2408 FASTstart Guide

6.1.4

Bypass Set Expire

Usage

Guidelines

Use this command to set the period of time that the bypass switch will wait,
starting at the point of transmission, before considering a heartbeat packet to
be lost. If it takes more than the defined period of time for a heartbeat to arrive
at the second appliance port of the pair, it will be counted as lost. This
heartbeat loss will count towards the “Bypass Set Fail” and “Bypass Set
Reactivate” command counters.

Syntax

BYPASS SET EXPIRE (100-10000)

Example

BYPASS SET EXPIRE 200

Command

Notes



The number field in the command indicates the number of milliseconds
before counting the heartbeat as lost.



It’s recommended to set the expire count to be low enough that the
DURAstream will be able to detect abnormalities, but high enough that
it doesn’t occasionally drop heartbeats during normal operation.

6.1.5

Bypass Set Fail

Usage

Guidelines

Use this command to set the number of heartbeats that must be missed
consecutively to trigger a failover. Heartbeats are considered missed once they
hit the threshold defined by the “bypass set expire” command.

Syntax

BYPASS SET FAIL (1-30)

Example

BYPASS SET FAIL 3

Command

Notes



Once the number of consecutive heartbeats lost reaches the value set
by this command, traffic will directly be sent between the network port
pair.

6.1.6

Bypass Set Frequency

Usage

Guidelines

Use this command to set the rate at which heartbeats are transmitted out the
appliance port(s).

Syntax

BYPASS SET FREQUENCY (100-1000)

Example

BYPASS SET FREQUENCY 200

Command

Notes



The number field in the command indicates the number of milliseconds
between heartbeat transmissions.

«
...
34
35
36
37
38
...
»

Содержание DS-1404
























































Отзывы:

Нет отзывов