Datacom Systems DS-1404 Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 55

Datacom Systems DS-1404 Скачать руководство пользователя страница 37

Datacom Systems Inc. 2016

37

DURAstream

™

DS-1404, DS-1406, DS-2408 FASTstart Guide

6.1.7

Bypass Set Mode

Usage

Guidelines

This command is used to set the current operating mode of the Bypass
Segment.

Syntax

BYPASS SET MODE

(NORMAL, NORMAL HIGH AVAILABILITY, MANUAL

INLINE, MANUAL BYPASS, PASSIVE BYPASS)

Example

BYPASS SET MODE Normal

Command

Notes

Mode Options:



“Normal” – Bypass/Inline State Dependant on Heartbeats.



“Normal High Availability” – Dual Appliances Heartbeat Mode.



“Manual Inline” – Permanent Inline Appliance Mode.



“Manual Bypass” – Permanent Network Bypass Mode.



“Passive Bypass” – Permanent DURAstream Bypass Mode.

6.1.8

Bypass Set Packet

Usage

Guidelines

Use this command to set the type of heartbeats that the DURAstream sends
through the appliance.

Syntax

BYPASS SET PACKET <IPX. TCP-SYN, UDP, ETH, ICMP

Example

BYPASS SET PACKET TCP-SYN

Command

Notes



If your appliance looks for a specific packet type, it’s recommended to
set the heartbeat packet type to match it. This will provide the most
accurate analysis of the appliance.

6.1.9

Bypass Set Reactivate

Usage

Guidelines

Use this command to set the number of heartbeats that must arrive at the
appliance ports consecutively to for the DURAstream to consider the appliance
active.

Syntax

BYPASS SET REACTIVATE (1-30)

Example

BYPASS SET REACTIVATE 3

Command

Notes



Traffic will be sent back through the appliance when the reactivate
count is reached. The reactivate count is incremented when a heartbeat
packet successfully makes it back to the DURAstream before the time
indicated in the “bypass set expire” command.

«
...
35
36
37
38
39
...
»

Содержание DS-1404
























































Отзывы:

Нет отзывов