![background image](http://html1.mh-extra.com/html/datacard/sd260l/sd260l_installation-and-administrators-manual_3729528077.webp)
SD260L/SD360/SD460 Installation and Administrator’s Guide
65
Change settings as needed, and then click Set Current to apply changes.
CustomCharHigh—Specify the numeric value of the highest ASCII character supported for
input data on the track.
CustomCharLength—Set the number of bits to represent one character of data on the track,
also called bits per character.
CustomCharLow—Specify the numeric value of the lowest ASCII character supported for
input data on the track.
CustomCharMask—Specify the mask value that is subtracted from the ASCII numeric value to
get the encoded value.
CustomCharMax—Specify the maximum number of data characters for the track. The value
does not include the start sentinel or end sentinel.
CustomDensity—Specify the number of data bits per inch of magnetic stripe media for the
track, also called bits per inch or bpi. Allowed values are 75 bpi or 210 bpi.
CustomEndSentinel—Specify the last character encoded, which identifies the end of
encoded data for the track.
CustomLrc—Specify a cumulative parity bit that is encoded after the end sentinel to provide
simple error checking.
CustomParity—Specify a character-level parity bit encoded after each character to provide
simple error checking.
CustomSdsNulls—The number of nulls between each copy of the data record. You should not
change this value.
CustomSdsRecords—The number of times to encode the data record. You should not change
this value.
CustomSdsSs—The number of start sentinels before each data record. You should not change
this value.
CustomStartSentinel—Specify the first character encoded, which identifies the start of the
encoded data for the track.
Содержание SD260L
Страница 8: ...viii ...
Страница 30: ...18 Installation ...
Страница 48: ...36 Elements of Card Design ...
Страница 114: ...102 Supplies and Parts ...