![background image](http://html1.mh-extra.com/html/datacard/sd260l/sd260l_installation-and-administrators-manual_3729528071.webp)
SD260L/SD360/SD460 Installation and Administrator’s Guide
59
KPower—Modify the print intensity for K (single-color) panel or K (single-color) ribbon.
Increase the value to make single-color printing thicker and more defined on the card.
Decrease the value for crisp bar codes or to prevent frequent ribbon breaks when
printing with the K panel.
KPower1200DPI—Modify the print intensity at 1200 dpi for the K panel or K ribbon.
Increase the value to make single-color printing thicker and more defined on the card.
Decrease the value for crisp bar codes or to prevent frequent ribbon breaks when
printing with the K panel.
KPower600DPI—Modify the print intensity at 600 dpi for the K panel or K ribbon.
Increase the value to make single-color printing thicker and more defined on the card.
Decrease the value for crisp bar codes or to prevent frequent ribbon breaks when
printing with the K panel.
KPowerDuplex—Modify the print intensity for the back-side K panel and K ribbons.
Increase the value to make single-color printing thicker and more defined on the card.
Decrease the value for crisp bar codes or to prevent frequent ribbon breaks when
printing with the K panel.
KWhiteShade—Modify the amount of power applied to the printhead to reduce ribbon
friction without transferring material. Decrease the value if material transfers to the card
when it should not.
LeadTrim—Modify the number of millimeters to remove from the leading edge of a full-size
image to keep it within the print area (1 mm = 0.0394 in. or about 11.8 dot rows).
SettingsGroupPurpose—State the purpose of a settings group. Group names are not
changeable. Use this option to identify the reason for creating a settings group.
TPower—Modify the intensity of the T (topcoat) ribbon panel.
Increase the value to make printed topcoat thicker or more uniform.
Decrease the value to prevent frequent ribbon breaks while printing the topcoat.
TPowerDuplex—Modify the intensity of the back-side T (topcoat) ribbon panel.
Increase the value to make printed topcoat thicker or more uniform.
Decrease the value to prevent ribbon breaks while printing the topcoat.
Содержание SD260L
Страница 8: ...viii ...
Страница 30: ...18 Installation ...
Страница 48: ...36 Elements of Card Design ...
Страница 114: ...102 Supplies and Parts ...