DataCard SD260L Скачать руководство пользователя страница 105 | Manualshive

Страница: 105 / 130

DataCard SD260L Скачать руководство пользователя страница 105

SD260L/SD360/SD460 Installation and Administrator’s Guide

93

The following laminator supplies are available. Most are available for a full card, smart card, or
magnetic stripe card. Contact your dealer for a complete list of laminator supplies.

Patch:



Clear DuraGard®, 0.5 mil, up to 350 images/roll



Clear DuraGard, 1.0 mil, up to 300 images/roll



Holographic DuraGard 0.6 mil, Random, up to 350 images/roll



Holographic DuraGard, Registered, 0.6 mil, up to 350 images/roll



Holographic DuraGard, 1.0 mil, Random, up to 300 images/roll



Holographic DuraGard Registered, 1.0 mil, up to 300 images/roll

Topcoat:



Clear, number of images depends on lamination settings



Holographic, Random, number of images depends on lamination settings



Registered Holographic, up to 600 images/roll



Clear DuraShield™, number of images depends on lamination settings (see note)



Holographic DuraShield, Random, number of images depends on lamination settings (see
note)



Holographic DuraShield, Registered, 500 images/roll (see note)

Caution: DuraGard patch overlay cannot be applied over a “T” panel topcoat applied
from a ribbon. Make sure that the DuraGard patch is applied to the card side without
a “T” panel topcoat.

DuraShield clear and holographic overlays must be used with a ribbon that includes
an inline topcoat (T) panel, for example, KT, YMCKT, YMCKT-K, YMCKT-KT, ymcKT, or
YMCKF-KT. It must be applied over the topcoat.

«
...
103
104
105
106
107
...
»

Содержание SD260L



































































































































Отзывы:

Нет отзывов