![background image](http://html1.mh-extra.com/html/datacard/rp90/rp90_user-manual_3645213036.webp)
Status Monitor
30
RP90 Plus E and RL90 User Guide
Property tab
The Property tab shows:
•
The version of printer firmware, and firmware
versions of any installed options such as
magnetic stripe encoder or laminator. “
????
”
means an option is not installed or connected.
•
Configuration information for options installed.
•
The unit number. (Use the LCD panel to set the
unit number, described in
“Using the Printer
LCD panel” on page 36
.)
•
The Print Count, which is the number of cards
printed.
•
The Thermal Head count, which is the number
of panels printed by the printhead currently
installed in the printer. (YMCK ink ribbon has four panels.)
Printer Select tab
The Printer Select tab shows:
•
The currently selected printer.
•
If more than one RP90 Plus E printer is
installed on the PC, you can change the printer
for which information is displayed by choosing
it from the Current Printer list. The Status
Monitor will communicate with the printer to
update information.
•
Use the
Scan
button to locate another printer if
it is not displayed in the list.
•
Use the
Sync Time
button to send the current
time on the PC to the printer.
•
Use the
Update
button to send changed values
to the printer.
•
Use the
Refresh
button to obtain current values from the printer.
•
If the printer is set, using the LCD panel, to use a LAN connection, this tab displays
the default settings (which cannot be changed). If the printer is connected using a
USB connection, you can use this page to set the IP address and other network
values. See
About Network Settings
in the
Installation Guide
.
•
If you need to assign a printer name different from a choice provided by the printer,
make sure the printer is installed with a USB connection and then enter the new
printer name. Your network administrator can provide information about allowed or
required names on your network.
•
Security settings, which can be set only when the printer is connected using a USB
connection. are available. Use the
Details
button to open the IPSec Setting dialog
box. See the
Installation Guide
for the steps to follow.
Содержание RP90
