![background image](http://html1.mh-extra.com/html/datacard/rp90/rp90_user-manual_3645213018.webp)
Power on
12
RP90 Plus E and RL90 User Guide
Power on
Check the PC connection
The printer and PC are connected when the printer is set up. To avoid
receiving error messages on the LCD panel, make sure that all supplies are
properly loaded and in position before powering on the printer. Before you
begin processing cards, check the following:
•
The printer door and card hopper are closed securely.
•
The USB data cable (with ferrite bead) is securely connected to the
printer and the PC.
OR
•
The Network data cable is securely connected to the printer and to a
network port.
•
The power cable is securely connected to the printer and appropriate
grounded power source.
•
The card stacker is attached to the printer or to the optional laminator.
•
Make sure cards and all other supplies are loaded. See
“Load
Supplies” on page 8
for more information.
Содержание RP90
