![background image](http://html1.mh-extra.com/html/datacard/rp90/rp90_user-manual_3645213011.webp)
About the laminator
RP90 Plus E and RL90 User Guide
5
About the laminator
The Datacard® RL90 card laminator is an optional laminating module that works with the
RP90 Plus E printer to add topcoat or patch material to printed cards. Holographic
laminating material is also available for added security and tamper resistance. A printed
card can be laminated manually by simply inserting it into the laminator, or automatically by
transferring the printed card from the RP90 Plus E printer to the laminator module.
The parts of the laminator
Laminator door
Open the door to access the laminator cartridge.
Laminator cartridge
Holds the laminate material.
Cartridge eject button
Press to release and remove the cartridge.
Laminator LCD panel
Shows the laminator status and any messages. Use it
to change laminator settings.
Power switch
Press the switch to power on the laminator.
Power receptacle
Plug in the power cord.
Printer port
Connection port for the printer.
Card stacker
Laminated cards exit here.
Future expansion port
Not used at this time.
Card inlet slot
Cards enter the laminator here.
CAUTION:
Do not connect or disconnect the laminator cable while the printer or
laminator are powered on.
Содержание RP90
