DataCard CD Series, Инструкция и руководство по установке

Страница: 57 / 86

SD/CD Installation and Administrator’s Guide 49
•
SettingsGroupPurpose ‐ State the purpose of the settings group. Group
names are not changeable. Use this option to identify the reason for creating
a settings group.
•
TPower ‐ Modify the intensity of the T (topcoat) ribbon panel.
Increase the value to make printed topcoat thicker or more uniform.
Decrease the value to prevent frequent ribbon breaks while printing the
topcoat.
•
TPowerDuplex ‐ Modify the intensity of the back side T (topcoat) ribbon
panel.
Increase the value to make printed topcoat thicker or more uniform.
Decrease the value to prevent ribbon breaks while printing the topcoat.
•
TrailTrim ‐ Modify the number of millimeters to remove from the trailing edge
of a full ‐ size image to keep it within the print area (1 millimeter equals 0.0394
inches or about 11.8 dot rows).
Increase the value to lengthen the printed area.
Decrease the value to shorten the printed area.
•
TWhiteShade ‐ Modify the amount of power applied to the printhead to
reduce ribbon friction without transferring material. Decrease the value if
material transfers to the card when it should not.
•
YMCPower ‐ Modify the intensity of the YMC (color) ribbon panel.
Increase the value to make the color printing more intense.
Decrease the value to reduce the color intensity or to prevent frequent ribbon
breaks when printing colors.
•
YMCPower600 ‐ Modify the intensity of the 600 dpi YMC (color) ribbon panel.
Increase the value to make the color printing more intense.
Decrease the value to reduce the color intensity or to prevent frequent ribbon
breaks when printing colors.
•
YMCPowerDuplex ‐ Modify the intensity of the back side YMC (color) ribbon
panel.
Increase the value to make the color printing more intense.
Decrease the value to reduce the color intensity or to prevent frequent ribbon
breaks when printing colors.