DataCard CD Series, Инструкция и руководство по установке

Страница: 79 / 86

SD/CD Installation and Administrator’s Guide 71
Cards
For best results, use high ‐ quality cards that meet the specifications and
recommendations described in this section.
Card Size
Use ISO ID ‐ 1 cards (CR80 cards). These cards have the following dimensions:
•
3.37 inches long by 2.125 inches wide (85.60mm long x 53.98mm wide).
•
0.010 to 0.030 inches thick (0.254 to 0.762mm thick).
For encoding magnetic stripe, use cards:
•
3.37 inches long by 2.125 inches wide (85.60mm long x 53.98mm wide).
•
0.010 to 0.030 inches thick (0.508mm to 0.762mm thick).
Actual card thickness can vary by up to ten percent from the sizes listed. Typically,
card bow must be less than the thickness of the card.
Card Material
Use cards with a glossy PVC surface, either 100% PVC cards or composite cards
with a PVC surface. Cards can have a magnetic stripe on one side of the card.
Pre-Punched Cards
For best results, punch cards after
printing them. The cards can have a
punched area within 1 inch (25mm)
of the left edge, as the cards are
loaded in the printer. If the card has
a magnetic stripe, the card cannot
be punched anywhere in the stripe.