Data Translation MACH Series, Руководство по началу работы

Страница: 59 / 62

Verifying Board Operation
51
6
6
6
6
6
6
6
6
6
4. From the DT-Acquire main menu, click Run , then
Start Pass Thru! .
Live video is asynchronously acquired to display memory, converted to
bitmap format, and displayed on the screen.
5. To stop the asynchronous passthru operation, click Run , then
Stop Pass Thru! from the DT-Acquire main menu.
6. If you wish, modify the parameters available for the DT3154
board by clicking the desired parameter under
Setup and
changing the associated values, then repeat steps 4 and 5.
Note: The value for the Select Input Source parameter selects
both the signal (red, green, and/or blue) to which the
Programmable A/D parameter applies, and the input channel (0
or 1) to which most other setup parameters apply.
If you change the video input channel, ensure that you connect
the video input signals to signals RVID1, GVID1, and BVID1.
7. When you are finished with this utility, from the DT-Acquire
main menu, click
Setup , and Close Device . Then, close the
application.