DATA-LINC GROUP
7
SRM6200E-SLC User’s Guide
PN 161-09990-002C
rev 3/29/04
Radio Parameter Configuration
The SRM6200E-SLC allows you to set several parameters to suit your particular application. All adjustments are done
through the SRM6200E-SLC setup program, a user interface that eliminates the need for setup diskettes or custom software.
To access the configuration menu, connect the radio modem’s configuration port to any terminal program with port settings of
19.2Kbaud, 8 data bits, no parity and one stop bit. With the modem connected to the PC running the terminal program,
press the Configure button. While any terminal program will work, examples for this manual were generated using the
Microsoft Windows 2000 application “HyperTerminal.”
Note: When using HyperTerminal, set Handshaking to none and use a standard straight through cable. If you are
using something other than HyperTerminal, it may be necessary to use a cable that has pins 4 and 6 connected
together on the modem side of the cable. Contact Data-Linc for further information.
Table 1: Terminal Settings
When the setup program is invoked the RF “IN” LED on the SRM6200E-SLC front panel will flash once when the Configure
button is pressed and the RF “Link” LED will remain on for the entire time the radio modem is in setup mode.
The main menu provides the radio modem’s unique call book number and the set of choices for editing the operational
parameters and viewing the performance data.
Figure 1: Main Menu
r
e
t
e
m
a
r
a
P
g
n
i
t
t
e
S
e
t
a
R
d
u
a
B
0
0
2
9
1
s
ti
B
a
t
a
D
8
y
ti
r
a
P
e
n
o
N
s
ti
B
p
o
t
S
1
l
o
r
t
n
o
C
w
o
l
F
e
n
o
N
