16
Please check the outer appearance of the product whether there are no fault appearances
found.
Do not drag or throw the inverter.
Since the inverter is a precise apparatus, do not drop the inverter or give any strong impact.
3.2 Installation Place
Caution
Please install the product at a place where the following conditions are met.
The inverter should be installed at a place where there is no direct sun light considering
installation direction or surrounding space to prevent reduction in lifespan or performance
degradation.
The product can be installed at indoor or outdoor place.
The inverter should be installed at a well-ventilated place if it is installed indoor.
Do not install the product at a vibrated place.
Do not install the product at the concrete wall as much as possible.
A lifespan of the inverter can be affected by an ambient temperature. Please make sure the
ambient temperature at the installed place does not exceed an allowable storage temperature
(-25 ~ 50℃).
Please avoid a place with high temperature and humidity (relative humidity is 90% or less
and no dew formation).
Since the inverter is high-temperature heating element, please install the inverter on the
surface of fire retardant material.
Please make sure facilitating heat dissipation by ensuring a space around the inverter.
Please avoid the place where there are oil mist, flammable gas, fiber dust, dust, and moisture.
Please install the product sturdily with the bolts.
Please install the product at a place without salinity. (In particular, if the product is installed
near the coastal area, product corrosion can occur. Thus, contact with salinity should be
avoided using additional methods such as installing an additional enclosure and indoor
installation.)
