DAS AUDIO SARA, Руководство по монтажу

Страница: 13 / 29

13
SARA manual / SARA - SUB
8.- Assembly of AX-SARA on a SARA unit. Pick-UP AX-SARA
and Max. number of units. Up tilt - down tilt
Fig.1
The figure shows how to attach the
Frame of AX-SARA accessory
(WLL=1100kgf) to a SARA unit. To do this,
remove the SARA ́s upper front pins, align
the holes with the frame and attach it
with the same pins.
Fig.2
The result can be seen in the figure.
Fig.3
Next step is to attach the rear part of the
frame to the cabinet.
Fig.4
First, place the rear connecting rod of the
frame in the slot, between the rear
plates, on the SARA. Remove the rear
pins of the SARA cabinet.
Fig.5
Insert back both rear pins. One at
position “0” and the second at “1” to
lock the frame. This is the correct way to
transport the accessory on top of SARA
units stacked on their dolly.
Fig.1
Fig.3
Fig.2
Fig.4 Fig.5
0º
LOCK
(0+1)
Pick-up
Frame Use ALWAYS 0º position