DAS AUDIO SARA, Руководство по монтажу

Страница: 8 / 29

8
SARA manual / SARA - SUB
5.- Assembly of 4 SARA units with TOP-PL-SARA on platform
Fig.1
Stack the first SARA unit on the platform
as previously described in this manual.
To attach the following unit, remove the
top security pins of the bottom unit.
Align the two units and remove the two
bottom security pins of the upper unit.
Lower the connecting rods and make
sure the holes are aligned correctly.
Fig.2
Re-insert the four security pins to attach
the two SARA units at the front.
Fig.3
Now, it is time to attach the back of the
unit.
Fig.4
Remove the security pin that locks
the rear connecting rod and lower the
connecting rod from the upper unit.
Fig.5
Attach the connecting rod with the
security pin and remove the security pin
from the bottom unit.
Fig.6
Insert this pin into the following hole
used by the first pin, as shown in the
figure.
Fig.1 Fig. 2
Fig.3 Fig.4 Fig.5 Fig.6