DAS AUDIO SARA, Руководство по монтажу

Страница: 4 / 29

4
SARA manual / SARA - SUB
2.-Assembly of SARA units on transport platform PL-SARA.
Disassembly
Fig.1
Remove the two front security pins
from the SARA unit and release the
connecting rods.
Gently place the unit inserting the
connecting rods into the dedicated slots
of the transport platform.
Fig.2
To attach the SARA unit to the transport
platform, insert the security pins into the
front holes of the platform as shown in
the figure. Only one pin per side is
needed!!
Fig.3
Next step, attaching the back of the unit
to the dolly.
Fig.4
Remove the pin that locks the rear
connecting rod.
Turn the connecting rod and place
it between the two rear plates of the
transport platform, as shown in the
figure. Attach the connecting rod to
the platform inserting the security pin
as shown in the figure. Only one PIN
needed!! For disassembly, proceed in
reverse order to that described in the
steps above.
Fig.1 Fig. 2
Fig.3 Fig.4