DAS AUDIO 10721170, Руководство пользователя

Страница: 25 / 45

25 INTEGRAL-M88 Manual
INTEGRAL
Front display - Menu and navigation
SRC SELECTION
Select within this menu with the UP / DOWN keys the output
channel on which you want to act; once in the channel press EN-
TER. Select within the chosen channel each of the inputs that you
want to assign to the channel with the UP / DOWN keys. Through
the front panel, all inputs assigned to an output channel (AMP or
AUX) will do so with the defined gain of each input channel. For
example, if for the AMP-1 output channel we want the inputs to be
IN A + B, and previously in the INPUT GAIN menu we have defined
IN-A 0dB, IN-B -6dB, AMP-1 will have as signal input the sum of
the two channels A and B but with the volume of input B attenu-
ated 6dB. Remember, if the input channel selection for an output
is OFF, nothing will be assigned to that output channel.
For all output channels (AMP-1,2,3,4 and AUX-1, 2, 3, 4) these are
the options and combinations of inputs available from the front
panel:
OFF: no input assigned
IN-A: only channel A IN-B: only channel B
IN-C: only channel C IN-D: only channel D
IN-E: only channel E IN-F: only channel F
IN-G: only channel G IN-H: only channel H
IN A+B: sum of channels A y B IN A+C: sum of channels A y C
IN A+D: sum of channels A y D IN C+D: sum of channels C y D
IN E+F: sum of channels E y F IN G+H: sum of channels G y H
ANALOG: sum of all analog input channels, A, B, C y D
DANTE: sum of all digital input channels E, F, G y H
Remember that to have access to the input-output matrix with
advanced gain settings for each input, you must connect the
unit to the network and define the settings with ALMA software.
The combinations of channels A + C and A + D are useful for
example to add, in an output channel, a microphone input (typ-
ically connected to input A or B, where “Phantom Power” is
available) and a line input (channel C or D).
The priority input channels we need to assign to each output do
not need to be routed from the SRC Selection menu. For exam-
ple, if in the AMP-1 output channel we have selected the sum IN
A + B as input sources and we want input E (DANTE-1) to have
priority, it will not be necessary to select IN-E as the input chan-
nel of AMP-1 from the SRC Selection menu. All you have to do is
select IN-E as the assigned priority input for the AMP-1 channel
in the Priority menu.