DAS AUDIO 10721170, Руководство пользователя

Страница: 24 / 45

24 INTEGRAL-M88 Manual
INTEGRAL
Front display - Menu and navigation
OUTPUT MUTE
Select within this menu with the UP / DOWN keys the channel
on which you wish to act; once on the desired channel, press
ENTER. Activate or deactivate MUTE with the UP / DOWN keys.
Remember that the OFF position indicates that the channel is
NOT muted.
IMPORTANT: even if an output channel is in MUTE mode, the
channel’s level meter will continue to show the presence of a
signal on the front display (PRE-MUTE). Only if the input chan-
nel that is routed to the output channel is muted the output
level meter will stop signaling the presence of a signal.
OUTPUT DELAY
Select within this menu with the UP / DOWN keys the channel
you want to act on; once on the desired channel, press ENTER.
Adjust the delay with the UP / DOWN keys. For each output
channel gain can be adjusted in steps of 1ms / 0.1m / 1ft
between 0ms and 135ms (0m and 46.3m, 0ft and 152ft). By
holding down the UP / DOWN keys you can increase or
decrease the delay value quickly.
INPUT GAIN
Select within this menu with the UP / DOWN keys the channel
on which you wish to act; once on the desired channel, press
ENTER. Adjust gain with the UP / DOWN keys. For each input
channel the gain can be adjusted in 0.1dB steps b 6dB
and -40dB. By holding down the UP / DOWN keys, you can
quickly increase or decrease the gain value.
OUPUT GAIN
Select within this menu with the UP / DOWN keys the channel
on which you wish to act; once on the desired channel, press
ENTER. Adjust gain with the UP / DOWN keys. For each out-
put channel the gain can be adjusted in 0.1dB steps b
15dB and -40dB. By holding down the UP / DOWN keys, you can
quickly increase or decrease the gain value.
INPUT MUTE
Select within this menu with the UP / DOWN keys the channel
on which you wish to act; once on the desired channel, press
ENTER. Activate or deactivate MUTE with the UP / DOWN keys.
Remember that the OFF position indicates that the channel is
NOT muted.
IMPORTANT: Even if an input channel is muted, the level meter
of that channel will continue to show signal presence (PRE-
MUTE).