DAS AUDIO 10721170 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 45

background image

16

INTEGRAL-M88 Manual

INTEGRAL

Configuration of Dante digital audio

This chapter is not intended to be an advanced DANTE digital audio

management guide or a DANTE Controller user´s manual. For more

detailed and complete information on DANTE Controller and net-

work configurations consult resources on www.audinate.com

Each INTEGRAL-MAxxxx unit includes two RJ45 connectors on the

rear panel for its control and monitoring with ALMA software and

sending / receiving DANTE digital audio. Therefore, by using a sin-

gle cable (minimum CAT5e) users can control the units and manage

digital audio channels. The network infrastructure connected to the

units for the use of ALMA will also be used to manage the DANTE

channels; in this way it is possible to save on installation and wiring

costs.

Each unit has 4 DANTE digital INPUT channels and 4 DANTE digital

OUTPUT channels.

The routing of the DANTE digital audio channels (DANTE-1, DANTE-2,

DANTE-3 y DANTE-4) between the different DANTE capable units

present in the network has to be done using DANTE controller soft-

ware:

https://www.audinate.com/products/software/dante-controller

DANTE Digital INPUT channels are shown on the display of the units

(“D” stands for Digital INPUTS)

DANTE digital INPUT channels DANTE-1, DANTE-2, DANTE-3 y DAN-

TE-4 are named INPUT E, F, G y H in the INTEGRAL-MA units.

Dante controller, channel routing

For routing the digital audio channels of the INTEGRAL-MAxxxx

units it is necessary to use the DANTE Controller software and

have the units connected through an ethernet switch, as a min-

imum. If ALMA is also going to be used as control software, it is

recommended to use a DHCP server or connect the units to a

Router.

DANTE Controller provides essential information regarding the

status of each device (Device) on the audio network. Latency, the

state of the clocks of each device, the bandwidth used with the

transmission of digital audio are monitored in real time, any er-

rors that have arisen can also be controlled in the event history.

Devices are automatically recognized by the software. In addi-

tion, the firmware version of each DANTE board located on the

network is displayed. If necessary, the DANTE UPDATER appli-

cation will be used to update the devices to the latest firmware

version.

Dante Controller is available for Windows and macOS.

«
...
14
15
16
17
18
...
»

Содержание 10721170














































Отзывы:

Нет отзывов

Похожие инструкции для 10721170

Бренд: Campbell Hausfeld Страницы: 12

Бренд: Hama Страницы: 14

Super Speed USB 3.0 Hub

Бренд: Hama Страницы: 14

Бренд: Hama Страницы: 12

Бренд: Hama Страницы: 14

Premium Silver USB 2.0 Hub 1:4

Бренд: Hama Страницы: 12

Бренд: Hama Страницы: 18

uRage Vendetta 210

Бренд: Hama Страницы: 36

3CR17251-91 - Switch 5500G-EI Stackable Gigabit...

Бренд: 3Com Страницы: 148

Бренд: Cabletron Systems Страницы: 110

Бренд: StarTech.com Страницы: 2

Бренд: Touch-plate Страницы: 12

EXHL-TRN-LE1 Series

Бренд: Larson Electronics Страницы: 2

SISTG1040-242-LRT

Бренд: Transition Networks Страницы: 31

Бренд: Moxa Technologies Страницы: 7

Бренд: TRENDnet Страницы: 2

Бренд: Inter-m Страницы: 12

Бренд: MTHTrains Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды