15 / 47
and the wall surface must meet the load-bearing requirements of the battery system;
d. the product installation location should avoid sun, rain, snow, etc.;
e. need to be installed by professionals;
f. If the product is disassembled or used under low temperature or high humidity, there
may be condensation of water droplets. It must be installed after the product is completely
dry, otherwise there is danger of electric shock;
g. In any emergency, please stop charging and discharging immediately, and
disconnect the circuit breaker;
h. All power outlets should be connected to the PGND cable.
2.3
Tool preparation
Lifting equipment
Phillips
screwdriver
Slotted
screwdriver
Insulated adjustable
wrench
Multimeter
Insulating
protective shoes
Insulating tape
Insulated gloves
Steel tape
Complete socket
wrench
Impact drill
Rubber hammer
Wire stripper
Diagonal pliers
Utility knife
Crimping tool
