14 / 47
Component schematic
2.2
Before installation
This manual contains important information for the installation and safe operation of this
product. Please follow the instructions below before starting the installation:
a. Check whether the ambient temperature of the installation site is within the specified
range of -10 °C to +45 °C; if the product is working in the environment below 0 °C for a long
time, the battery life will be reduced;
b. The area where the product is placed needs to be well ventilated, away from
dangerous substances such as water, flammable gases and corrosive agents; it is forbidden
to install and operate in salt spray environment;
c. The product is prohibited from tilting or side-discharging, and the ventilation on both
sides is good, leaving a heat dissipation space of ≥300mm. The installation of the ground
1. Cabinet X1
3. Expansion bolt X8
4. Plastic plug X4
6. Cable tie X20
2. Battery module X4
5. Combination
screwX10
7. Boot line with
Connector 4PX1
8. Cable 150X2
9. Cable 800X1
15. Cable with
connector 2650X1
10. Power line218
Orange X3
11. Power line 218
BlackX2
12. Power line 1400
BlackX1
13. Power line 2150
BlackX1
14 Power line 2650
Orange X1
16. Ground line
150mmX2
、
250mmX2
17. Ground line
2100mmX1
18. Matching
resistanceX2
