Copyright © 2008 – 2019 DARE!! Products
Page 16
In order to obtain the correct absolute power level, the user can enter the measurement frequency
in the frequency window (see Figure 6). This window will appear after pressing the frequency
button next to the power sensor data.
Figure 6: Example of the frequency window
Remark: When the user does not enter the correct measurement frequency, the power sensor will
not display the correct absolute power level.
The user can also enter the filter setting (see Figure 7), to select a ‘filter time constant’. For more
information, see chapter 6, ‘Radi
P
ower
®
Specifications’.
Figure 7: Example of the filter window
4.3
Remote Control
The Radi
P
ower
®
can be controlled remotely through the interfaces of the Radi
C
entre
®
. The exact
communication protocol can be found in the Radi
C
entre
®
manual. The specific commands for the
Radi
P
ower
®
are shown in chapter 5 ‘Radi
P
ower
®
Command Set’.
