Copyright © 2008 – 2019 DARE!! Products
Page 13
3.2
Software Configuration
In order to control the Radi
P
ower
®
from a computer, one can use either custom made software or
the Radi
M
ation
®
EMC software package from DARE!! Instruments (to be purchased separately).
If the Radi
P
ower
®
is operated manually, this chapter can be skipped.
If Radi
M
ation
®
software is used; select the required device driver for the Radi
P
ower
®
.
3.2.1
Radi
M
ation
®
software
1.
Configure the Radi
M
ation
®
software for a Radi
P
ower
®
/ Radi
C
entre
®
power sensor.
Configure a device driver and select the correct communication port and device
number.
2.
In the ‘equipment list’ that you are using, select the ‘power sensor’ device driver.
3.
Open a Test Set-up File (TSF) and click on the ‘Inputs’ button. Select the power
sensor(s) to be used.
4.
Save the TSF.
Radi
M
ation
®
is now ready for use with the Radi
P
ower
®
/ Radi
C
entre
®
power sensor.
The Radi
M
ation
®
software package verifies the power sensor at the beginning of each test (if a
power sensor is selected).
If you are using the Radi
P
ower
®
/ Radi
C
entre
®
power sensor system with any other EMC test
software package, we refer you to chapter 5 ‘Radi
P
ower
®
Command Set’.
