Dare RadiPower USB1004A, Руководство по эксплуатации продукта

Страница: 15 / 37

Copyright © 2008 – 2019 DARE!! Products Page 15
4.2 Manual Control
Once the Radi C entre ® is switched on, the Radi P ower ® can be activated from the ‘main’- screen 3 on
the Radi C entre ® touchscreen. Readings from the sensor can be taken directly from the TFT screen,
with the Radi M ation
®
EMC software or any other (custom made) software package.
4.2.1 Sensor configuration
The ‘status’ button in the ‘main’ screen of the Radi
C
entre ® will display the detected Radi
P
ower ®
plug-in card and sensor measurements (see Figure 4). To monitor the measured power level(s),
one can go to the ‘control’ screen (see Figure 5) by pressing the Radi
P ower ® ‘status’ button.
Figure 4: Example of the Radi P ower ® status button in the 'main' screen
Figure 5: Example of the Radi P ower ® control screen
3
Please note that the screenshots shown in this manual are related to Radi C entre
®
firmware v1.16.0. Other
version may look different and support other functions.