About This Manual
PCI-MIO E Series User Manual
xiv
©
National Instruments Corporation
worthwhile to look through the software documentation before you
configure your hardware.
•
Accessory installation guides or manuals—If you are using
accessory products, read the terminal block and cable assembly
installation guides. They explain how to physically connect the
relevant pieces of the system. Consult these guides when you are
making your connections.
•
SCXI Chassis Manual—If you are using SCXI, read this manual for
maintenance information on the chassis and installation
instructions.
Related Documentation
The following documents contain information you may find helpful:
•
DAQ-STC Technical Reference Manual
•
National Instruments Application Note 025, Field Wiring and Noise
Considerations for Analog Signals
•
PCI Local Bus Specification Revision 2.0
The following National Instruments manual contains detailed
information for the register-level programmer:
•
PCI-MIO E Series Register-Level Programmer Manual
This manual is available from National Instruments by request.
You should not need the register-level programmer manual if you
are using National Instruments driver or application software.
Using NI-DAQ, ComponentWorks, LabVIEW, LabWindows/CVI,
Measure, or VirtualBench software is easier than the low-level
programming described in the register-level programmer manual.
Customer Communication
National Instruments wants to receive your comments on our products
and manuals. We are interested in the applications you develop with our
products, and we want to help if you have problems with them. To make
it easy for you to contact us, this manual contains comment and
configuration forms for you to complete. These forms are in
Appendix D, Customer Communication, at the end of this manual.