PCIe-AIO14 User Manual (Rev 1.2)
- 10 -
http://www.daqsystem.com
4. Installation
This section explains how to install PCIe-AIO14 board in PC and confirm the device.
4.1 Confirm Contents
Before installing the board, make sure that there is no abnormality in the components.
-
PCIe-AIO14 Board
-
Installation CD (Driver/Manual/API/Sample Program etc)
4.2 Installation Sequence
The board should be used in Windows XP SP2 over, Windows 7, Windows 8 and Windows 10.
First, turn off the PC, insert the PCIe-AIO14 board into the PCI slot, and then power on the PC. The
following describes the process of installing the device in Windows XP.
When the "Welcome to the Found New Hardware Wizard" window opens, select it as shown below
and click the "Next" button.
[Fig 4-1. New Hardware Wizard Start]
