DAPAudio D3207 Entertainer mobile set pro, Руководство по эксплуатации продукта

Страница: 9 / 31

7
Mixer channels
1. Level control
Adjust the volume level of each channel. Rotating the control clockwise increases
the volume of each channel, counterclockwise decreases the output volume.
You can adjust this volume control knob after the main volume has been set up.
2 / 3 / 4. Equalizer section (HIGH / MID / LOW)
The mixer’s equalizer section allows shaping of the incoming audio signal. Turning
the equalizer controls to the right amplifies the frequency range, turning to the left
attenuates the signal. Minor changes to the equalizer controls usually produce the
best results. Try to avoid excessive enhancement of the mid band.
5. Eff/Aux control
This control lets you route the corresponding input signal to the integrated digital
effect unit at variable levels. In this way assigning special effects to musical
instruments or vocals is fairly simple. When making an effect-mix, it’s advisable to
start with all FX- controls set to their center position. You can further increase or
reduce the effect’s intensity, depending on your personal preferences. Please
make sure to carefully monitor the
Peak (23) LED in the DFX channel during a
performance.
6. Pan control
By using the panorama control you can change the input signal’s position within
the stereo image. When the panorama control is set to center position, the audio
signal is equal for both the left and right output.
7. Level control
Adjust the volume level of each channel. Rotating the control clockwise increases
the volume of each channel, counterclockwise decreases the output volume.
You can adjust this volume control knob after the main volume has been set up.
8 / 9 / 10. Equalizer section (HIGH / MID / LOW)
The mixer’s equalizer section allows shaping of the incoming audio signal. Turning
the equalizer controls to the right amplifies the frequency range, turning to the left
attenuates the signal. Minor changes to the equalizer controls usually produce the
best results. Try to avoid excessive enhancement of the mid band.
11. Eff/Aux control
This control lets you route the corresponding input signal to the integrated digital
effect unit at variable levels. In this way assigning special effects to musical
instruments or vocals is fairly simple. When making an effect-mix, it’s advisable to
start with all FX -controls set to their center position. You can further increase or
reduce the effect’s intensity, depending on your personal preferences. Please
make sure to carefully monitor the
Peak (23) LED in the DFX channel during a
performance.
12. Pan control
By using the panorama control you can change the input signal’s position within
the stereo image. When the panorama control is set to center position, the audio
signal is equal for both the left and right output.