DAPAudio D3207 Entertainer mobile set pro, Руководство по эксплуатации продукта

Страница: 13 / 31

11
50. Composite Video Out
Connect the composite video input of your TV-set to this output.
51. L/R button
This button allows you to assign the DVD/MP3 player’s left channel, right channel or both (stereo)
channels to the main mix.
Tuner
52. Tuner frequency display
Displays the tuner frequency in MHz when in FM mode or in
KHz when in AM mode.
53. Tuner status LED’s
The FM LED lights up in FM mode and dims in AM mode.
The green Stereo LED lights up if the tuner is in stereo mode
And dims if the tuner is in mono mode.
If the tuner is in stereo mode, the red stereo LED lights up if
the radio program received is in stereo.
54. Tuner control buttons
The reset button allows you to reset the tuner.
The stereo/mono button allows you to switch the tuner
between stereo and mono mode, the mono mode can be
useful if the master section is in main/monitor mode (in main/
monitor mode the tuner and CD/DVD signals will be routed
to the main output only).
Press the Up button to tune upwards stepwise. Pressing and holding this button for more than 1
second will start auto search. Now the searching will stop at the first station which comes in with sufficient
strength.
Press the
Down button to tune downwards stepwise. Pressing and holding this button for more than 1
second will start auto search. Now the searching will stop at the first station which comes in with sufficient
stength.
55. Tuner Volume Control
Controls the level of the tuner.
Note: If the Main stereo/monitor switch (15) is set in main monitor position, the tuner signal will be routed
to the Main output only and will not be routed to the monitor output.
Note: Turn the tuner volume (55) control fully counterclockwise (minimum) if the tuner is not used.
Use the included antennas.
As this unit has a switched power supply, there is a slight possibility of interference when listening to
the AM band.