DAPAudio D3207 Entertainer mobile set pro, Руководство по эксплуатации продукта

Страница: 12 / 31

10
36/38. Power and Protect Indicators
The green Power LED indicates the unit is switched on.
The red Protect LED Indicates that the power amp is in Protect mode (speakers disconnected by the
output relay).
37. Clip Indicators
The orange LED indicates the clipping status for the left and right amplifier outputs.
39. EFF/AUX Send
Use this output in combination with the Aux Return (33) to connect an external effect device. Using an
external effect device in your aux effect loop will run this effect in parallel with the internal effects.
40. Foot Switch
The foot switch connector allows you to mute the internal DSP section. The input accepts a standard ¼”
jackplug shorting the tip to the sleeve will mute the DSP section.
DVD/CD/USB player
41. Display
42. DVD Disc Holder
Place the disc in the holder. Press the Eject (45) button to open and close the disc holder.
43. DVD/MP3 Level Control
Controls the level of the DVD/MP3 player.
Note: If the Main stereo/monitor switch (15) is set in main monitor position, the DVD/MP3 signal will be
routed to the Main output only and will not be routed to the monitor output.
44. Stop
Press this button to stop playback.
45. Eject
Press this button to open and close the disc holder (42) .
46. USB Port
Use this port to connect your USB stick for playback/recording. Make sure that all MP3’s are located in the
root directory. The Entertainer mobile set active will not recognize folders on a USB stick.
47. Play/Pause button
Use this button to start playback. Press once to start playback, twice to set the pause mode, and
again to resume playback.
48. Previous Button
Use this button to go back to the beginning of the current track or select a previous track for playing.
49. Next Button
Use this button to skip to the next track.